机械毕业设（论文）-车窗扣座注塑模具设计（全套图纸）.doc

PAGE 18模具毕业设计说明书设 计 题 目 ：车窗扣座零件模具毕业设计说明书设 计 者：班 级：指 导 教 师：摘 要论文根据工程实际的需要完成车窗扣座的注射模设计。在设计中采用塑料注射成型论文中具体分析了产品的工艺性,确定了所采用塑料的工艺参数和所采用的成型设备,确定了模具制作的总体方案,分析并解决了模具的总体结构和各工作部分的具体结构,并进行了一些必要的尺寸计算和强度的校核。论文中还对分型面、浇注系统、脱模机构和温度调节系统进行了分析设计，完成了工件工程图设计，圆满完成了模具设计所要求的各项工作。本文中针对车窗扣座注射模具制定出合理的设计结构，其中包括成型部分及其零部件设计，浇注系统设计，脱模机构设计，冷却系统设计等。根据分析，设计了一套塑料注射模具，并对模具以及主要零件进行了CAD绘图。关键字：注射模具，浇注系统，脱模机构，冷却系统全套图纸，加153893706AbstractThis paper according to the actual need to complete the design of the injection mould for the window fastener seat. Used in the design of plastic injection molding in the specific analysis of the process of product, the process parameters of plastic and forming equipment used to determine the overall scheme was determined, mold making, analysis and solve the specific structure of the mold overall structure and each part of the work, and check the necessary size calculation and strength. Also, the paper surface, gating system, demoulding mechanism and temperature control system analysis and design, completed the engineering design, the successful completion of the work required by the die design.In this paper, in view of the window button seat injection mold the development of a reasonable design structure, including molding parts and components design, gating system design, demould mechanism design, the design of the cooling system. According to the analysis, a set of plastic injection mold design and mold, and the main parts of the CAD drawing.Keywords: ejection mechanism of injection mould, gating system, cooling system目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc416293925 摘 要 PAGEREF _Toc416293925 \h II HYPERLINK \l _Toc416293926 Abstract PAGEREF _Toc416293926 \h III HYPERLINK \l _Toc416293927 目 录 PAGEREF _Toc416293927 \h IV HYPERLINK \l _Toc416293928 第1章 前言 PAGEREF _Toc416293928 \h 1 HYPERLINK \l _Toc416293929 第2章 塑件的工艺分析 PAGEREF _Toc416293929 \h 2 HYPERLINK \l _Toc416293930 2.1塑件的工艺性分析 PAGEREF _Toc416293930 \h 2 HYPERLINK \l _Toc416293931 2.