毕业设计（论文）-钢包加盖装置总布置及其转动方式的设计（套图纸）.doc

武汉科技大学本科毕业设计 PAGE i摘 要钢包加盖装置通常设置在钢包回转台上，为到达回转台的盛有钢水的钢包加保温盖的装置。该装置具有回转、升降等功能。回转和升降运动可用液压方式，也有用电动机械方式的。可在回转台的两侧设置两套装置，对浇注的钢包和等待浇注的钢包同时加盖，亦可设一套装置，只在浇注时加盖。它在连铸设备中的作用非常大，是重要的冶金设备之一。本文主要解决钢包加盖装置的总体布置及转动机构的设计问题。钢包加盖装置要实现的功能主要包括：操作臂水平的旋转运动和垂直的升降运动，以及加盖和揭盖动作。采用液压缸驱动来完成加盖和揭盖动作，采用电机驱动来完成操作臂的转动，为了实现钢包加盖装置的自动控制，增加了接近开关装置和电气滑环装置。本文是依据钢包加盖装置生产过程和工作原理，首先选定合适的方案，根据方案设计操作臂和支撑柱体，同时选择相应的液压缸并进行校核；然后根据相应的条件设计计算转动机构；最后对传动轴和其他零件进行强度校核，最终完成设计。关键词： 冶金； 钢包加盖装置； 转动机构全套图纸加153893706Abstract Ladle stamping device usually set the stage in the ladle turret, turret to reach the ladle containing molten steel covered with thermal devices. The device has a rotating, lifting and other function. Hydraulic rotary and down movement means can also be useful way of electric machinery. Both sides of the rotary table can be set two devices, on the casting ladle and pouring ladle while waiting for stamping, a device can be set only when stamped in the casting. Its role in the continuous casting equipment is very large, is one of the important metallurgical equipment.  In this paper, stamped with the device address ladle overall layout and design of rotating bodies. Ladle stamped device to achieve the main functions include: operating arm of the level of vertical lift rotary motion and movement, as well as stamped and Uncovery action. Driven by hydraulic cylinders to complete the seal and expose cover actions to complete the operation with motor-driven rotating arm, ladle stamped in order to achieve the automatic control device, an increase of nearly switchgear and electrical slip ring device. This article is a stamp device according to the ladle and working principle of the production process, first select the appropriate option, based on program design, operation and support arm cylinder, and select the appropriate hydraulic cylinders and the check; then calculated according to the corresponding rotating body design conditions; the final drive shaft and other parts of the strength check, the final d