毕业设计---线切割加工工艺分析1.doc

郑州轻院轻工职业学院专科毕业设计（论文）题 目 快走丝线切割加工在 模具制造中的应用 学生姓名 郭纹甫 专业班级10模具设计与制造一班 学 号 系 别 轻化工程系 指导教师（职称）李宏兵（讲师）完成时间 2013年4月10日 快走丝线切割在模具加工制造中的应用 PAGE 摘 要本论文是围绕线切割加工工艺来讲述的，首先简单的介绍了线切割加工，线切割加工作为一门特殊的加工方法，具有加工精度高、速度快、操作控制简便以及方便地加工复杂零件等特点，是机床数控技术的重要应用领域之一。文中描述了线切割加工的整个过程：（1）分析图样，明确加工要求；（2）对工件已加工表面进行分析，确定工艺基准；（3）根据工艺基准选择定位方法；（4）根据分析结果，合理选择切割路线和加工速度。并且针对加工生产过程中的常见问题，分析原因，问题主要出现在工件的装夹，切割路线的选择，电极丝的松紧和电脉冲的选择上。总结前人的经验，并制定合理的解决措施。由于线切割加工往往是最后一道工序，如果发生变形将造成难以弥补的损失。所以在制定线切割加工工艺时必须慎之又慎。 关键词：电极丝、数控技术、线切割加工AbstractThis paper is about the process of cutting processing, first introduced simply wire-cutting processing, wire-cutting processing as a special processing method, has the processing speed, high precision, simple and convenient operation control processing complex components etc, nc technique is one of important applications. The paper describes the whole process of wire-cutting processing (1) analysis, clear pattern processing requirements, (2) the surface of workpiece machining, the paper analyzes technology standards, (3) according to the technical standards selection method, According to the results of analysis (4), the reasonable choice of cutting line and processing speed. In the process of production and processing of common problems, the paper analyzes the main problems in clamping workpiece, cutting line, the choice of electrode wire on the choice of firmness and electrical impulses. Summarize the experience, and formulate measures. Because wire-cutting processing is often last procedure, if the deformation will cause irreparable damage. So in wire-cutting processing process must be formulated.Keywords:Wire electrode, CNC technology, wi