ye型滚齿机设计1k4sc.doc

摘 要Y3150E型滚齿机刀架系统齿轮加工正朝着环保、高效、高精度及无屑加工方向发展，齿轮加工机床正朝着全数控、功能复合、柔性、自动化、安全性及网络化方向发展。传统机械式滚齿机传动结构异常复杂、传动效率低、传动精度差、磨损严重、切削速度低，在各方面都不能满足现代滚齿机的性能要求；普通全数控滚齿机虽然具有全数控化、柔性好、安全的特点，但是机械传动环节的存在始终限制其加工速度的提升，不能适应干式切削的需要。因此，国外的部分厂家从最近几年才开始研制“零传动”齿轮加工机床。零传动滚齿机突破了传统齿轮加工机床的结构设计原理，采用电主轴和内置力矩电机直接驱动滚刀旋转运动和工件轴旋转运动，是齿轮机床设计技术的重大变革。但国外零传动机床的售价很高（是一般数控机床的 2～3倍），设计原理和技术资料严格必威体育官网网址，形成了技术垄断的局面。由于这里不能上传完整的毕业设计（完整的应包括毕业设计说明书、相关图纸CAD/PROE、中英文文献及翻译等），此文档也稍微删除了一部分内容（目录及某些关键内容）如需要其他资料的朋友，请加叩扣:2215891151为了打破国外的技术垄断，尽快提高我国齿轮加工机床的设计/制造水平，研究和开发高速、高精度零传动滚齿机是十分必要的。零传动滚齿机的研制基于零传动功能部件，由电主轴直接驱动的零传动刀架部件是研发的核心之一。我的课题主要内容是滚齿机刀架系统设计。滚刀箱固定在刀架滑板上，滚刀心轴插入滚刀主轴并用拉紧螺栓固定在主轴上。为了保证主轴与前轴承的适当间隙，前轴承是做成外锥并开口。调整轴承上的两个螺母，可以使前轴承做轴向移动，使前轴承孔收缩便可消除主轴和轴承间过大的间隙。关键词：滚齿机、刀架、动静态特性 ABSTRACTY3150E type hobbing machine tool systemThe gear processing is developed an environment protecting, high-efficiency,high-precision and chipless machining mode, meanwhile the gear machine tools developed the completely-digital-control, function-complex, flexible, automatic, secure and network mode. Traditional gear hobbing machine can not satisfy performance demand of modern gear hobbing machine, because of its disadvantages, such as complex drive structure, low drive efficiency, low drive precision, bad abrasion, low cutting speed, and etc. normal NC gear hobbing machine has characteristics of CNC,good flexible and safety, but because the mechanical drive limit the cutting speed , it also can not fit for the demand of dry cutting.so ,some overseas companies have started to study zero-chain gear hobbing machine . zero-chain gear hobbing machine breaks through structure design principle of traditional gear cutting machine ,in which motorized spindle and built-in torque motor have been applied to realize rotary of hobbing cutter and workpiece-shaft.it is an important technological innovation of the design of gear machine tool. But the foreign Nought-Drive machine tools are expensive(2-3 times as much as the common digital-contro