Standard Pipe Support Notes标准管道支架.doc

STYLEREF esdocid \* MERGEFORMAT 4WPI-AWS001, Rev. 2, Page page \* arabic10 of numpages 23GLOBAL Engineering SPECIFICATIONStandard Pipe Support Notes4WPI-AWS001Revision 28 February 2007Page page \* arabic1 of numpages 23RESPONSIBLE GROUP: GEO Plant Design: StressDenotes RevisionTable of ContentsSectionTitlePagegotobutton s1 1.Purpose2gotobutton s2 2.Scope2gotobutton s3 3.Related Documents2gotobutton s4 4.Pipe Support Notes2gotobutton s5 5.Using the Pipe Support Index4gotobutton s6 6.General Notes on Drawing Format of Support Drawings6gotobutton s7 7.Fabrication of Pipe Supports7gotobutton s8 8.Surface Finish of Pipe Supports9gotobutton s9 9.Identification of Prefabricated Supports9gotobutton s10 10.Materials of Construction10gotobutton s11 11.Structural Material Sizes10gotobutton s12 12.Anchor Bolts14gotobutton s13 13.Special Components15gotobutton s14 14.Approved Supplier Lists15gotobutton s15 15.Abbreviations18gotobutton s16 16.Reference19gotobutton Aa Appendix APipe Support Index Examples20gotobutton Sa Appendix A EntriesSample Pipe Support Entries for Examples in Appendix A231. PURPOSE 1.1 This worldwide engineering specification defines the Standard Notes to accompany the Worldwide Standard Pipe Supports and Special Pipe Supports.2. scope 2.1 This specification applies to the use of the Worldwide Standard Pipe Supports-Yard and Worldwide Special Pipe Supports-Yard as defined in Section 5.3. related documents 3.1 XxxEngineering Documents 4ACS-640131 Fabrication of Miscellaneous Metals 4ECE-M05 Supply and Fabrication of Structural Steelwork 4WEQ-6804 Painting and Corrosion Protection for Design Temperatures to 649°C (1200°F) 4WPI-AWS002 Construction of Site Pipe Supports (Type SSW) and Field-Supported Piping 4WPI-FWZM03 Field Installation of Pipe Supports Welded to Operating Piping3.2 American Society of Mechanical Engineers (ASME) B1.1 Unified Inch Screw Threads (UN and UNR Thread Form)3.3 American Society for Testing and Materials (ASTM) A36 Standard Specifi