上海市张江高科技园区某工程中英文岩土工程勘察报告.pdf

第一节 前 言 One Preface 受XX有限公司委托，我院对拟建“XX有限公司6 英寸集成电路芯 片项目”场地进行工程地质勘察工作。 Consigned by Shanghai Beiling Corp.Ltd., Our Institute has done the engineering geological investigation on the site on which Shanghai Beiling Sis-Inch Project is going to be carried out. 一、工程概况Ⅰ.General introduction of the project 拟建场地位于XX市XX园区3-1、3-2、3-3 地块。场地西邻XX电子有限公司， 东抵XX路，北近郭XX路。场地长约500m，宽约 150m。 The site is located in Block 3-2, Block 3-3 of Shanghai Zhangjiang High Technology Zone, with Tairong Electronics Co., Ltd. to the east, and Rd.Guoshoujing to the north. The site is 500m in length, and 150m in width. 场地内拟建建（构）筑物分 2 期进行。一期拟建芯片生产主厂房、动力站房各 1 栋，4 层工程师办公楼与餐厅、3 层行政办公楼各 1 栋，以及变电站、水塔、油罐等附属设施。二 2 期拟建生产主厂房、动力站房各 1 栋及气站、水塔、油罐等，总建筑面积 83186m 。各拟建 建（构）筑物设计技术参数见表 1。 The building project on the site is to be carried out in two stages. During the first stage, the following shall be finished: one main chip workshop, one engine workshop, one four-storey office building and dining hall, one three-storey administrative office, and other accessories such as the transformer substation, the water tower, the oil can, etc. During the second stage, one main workshop, one engine workshop, and the gas station, the water tower and the oil can, etc. should be finished. It spreads 83186 square meters. The design technical indexes for the buildings are listed in Table 1. 表 1 拟 建 物 性 质 特 征 一 览 表 基础设计资料 编 建筑 层数 跨度 柱距 建（构）筑物 结构 备 名称 面积 类型 或 埋深 荷重(kN) 注 号 (m2) 高度 (m) (m) 型 式 (m) 最大 一般 1 芯片生产主厂房 22