T4服务器Saris操作系统安装截图.docx

T4-4 安装 Configuring ILOM With the ILOM CLI and a Serial Connection The default serial port speed is 9600 baud, 8 bits, no parity, 1 stop bit no handshake. Log in to the ILOM SP. User = root Pwd = changeme Set the working directory. cd /SP/network 配置ILOM网络管理口的IP set pendingipaddress= set pendingipdiscovery=static set pendingipnetmask= set pendingipgateway= set commitpending=true set state=enabled Verify the changes. show /SP/network Log out of the ILOM SP. Exit Configuring the SPs Clock Properties via CLI To examine the current settings: - show /SP/clock To manually set the ILOM clock property values: - set /SP/clock datetime=11281452012 - set /SP/clock timezone=EST Configuring the SPs Clock Properties via GUI HYPERLINK Root/changeme 默认用户名和密码 SECURING THE ILOM SERVICE PROCESSOR (SP) (不改) ssh -l root SP-ipaddr set /SP/users/root password=new password Verifying the Firmware Versions using the CLI - show /HOST sysfw_version Verifying the Firmware Versions using the GUI Preparing for the Update HOST POWER ON POST set /HOST/bootmode script=setenv auto-boot? false Power on the server start /SYS start /HOST/console SPARC T4-4, No Keyboard Copyright (c) 1998, 2011, Oracle and/or its affiliates. All rights reserved. OpenBoot 4.33.4, 130560 MB memory available, Serial #100325758. Ethernet address 0:21:28:fa:d9:7e, Host ID: 85fad97e. VERIFY / UPGRADE LSI SAS 2008 RAID CONTROLLERS Using the FCODE Facility (from OBP) {0} ok probe-scsi-all ok show-devs select /pci@400/pci@1/pci@0/pci@0/LSI,sas@0 {0} ok show-volumes select /pci@700/pci@1/pci@0/pci@0/LSI,sas@0 {0} ok show-volumes {0} ok show-children 9 a create-raid1-volume Show-volumes Devalias {0} ok boot cdrom –s Fromat Quit Reboot – cdrom # eeprom auto-boot?=true  Eis-补丁 打完后，init 6 重启系统，，，看uname -a 版本号有升级