【毕业论文】3000升开式搪玻璃反应釜的设计.doc

3000升开式搪玻璃反应釜的设计 摘要：搪玻璃设备具有质量好、耐腐蚀等优点，对资源的节约、我国经济发展和石油工业的发展起着巨大的作用。设计一台操作容积为3000L的搪玻璃反应釜，全容积为3715L。按照GB150-1998《钢制压力容器》，HG2432-2001《搪玻璃设备技术条件》，HG/T2371-2003《搪玻璃开式搅拌容器》进行设计、制造、检验和验收。 容器圆筒的材料为Q235B，工作压力为0.4MPa，工作温度为0 ~ 200℃；夹套材料为Q235B，工作压力为0.6MPa，工作温度为0 ~ 200℃。此次设计主要进行了搪玻璃反应釜的结构设计和强度计算。进行了圆筒壁厚计算，夹套的壁厚计算，电动机轴功率校核，搅拌器强度校核，开孔补强计算，耳座的校核等。该设备按JB/T4709-2009进行焊接，焊缝进行无损探伤。该设备应根据TSG R0004-2009《固定式压力容器安全技术监察规程》和《压力容器定期检验规则》的要求定期检验。 关键词：搪玻璃；反应釜；耐腐蚀 The design for 3,000 litres open-cycle glass lining reaction kettle Abstract: Glass-lined equipment with good quality, corrosion resistance, etc., resource conservation, economic development and the development of the oil industry plays a huge role. The design operating glass-lined reactor with a volume of 3000L, 3715L full volume.《Steel pressure vessel》in accordance with the GB150-1998 HG2432-2001《glass-lined equipment technical conditions》, HG/T2371-2003《glass-lined open mixing vessel》for the design, manufacture, inspection and acceptance. The material of the container cylinder Q235B, working pressure to 0.4MPa, the operating temperature of 0 to 200 ° C; jacket material for Q235B, working pressure of 0.6MPa, the operating temperature of 0 to 200 ° C. The design is mainly for the structural design and strength calculation of glass-lined reactor. Cylinder wall thickness, the wall thickness of the jacket, the motor shaft power check, stirrer strength check, opening reinforcement calculation, ear seat check. The device JB/T4709-2009 welding, weld NDT. The equipment should be based on the requirements of the TSG R0004-2009《fixed-pressure vessel safety technology to monitor the procedures》 and 《regular pressure vessel inspection rules 》periodic inspection. Key words: Honing glass ; reaction kettle; corrosion resistance. 目录 摘要……………………………………………………………………………………1 Abstract………………………………………………………………………………2 绪论……………………………………………………………………………………5 第一章 反应釜釜体与传热装置……………………………………………………7 1.1反应釜釜体…………………………………………………………………7 1.1.1确定反应釜釜体的直径和高度……………………………………