ASME-II-A-2013-SA210 锅炉和过热器用无缝中碳钢管.pdfVIP

2013 SECTION II, PART A SA-210/SA-210M SPECIFICATION FOR SEAMLESS MEDIUM-CARBON STEEL BOILER AND SUPERHEATER TUBES SA-210/SA-210M (Identical with ASTM Specification A210/A210M-95 except for editorial differences in Table 2.) 313 SA-210/SA-210M 2013 SECTION II, PART A SPECIFICATION FOR SEAMLESS MEDIUM-CARBON STEEL BOILER AND SUPERHEATER TUBES SA-210/SA-210M (Identical with ASTM Specification A 210/A 210M-95 except for editorial differences in Table 2.) 1. Scope A 520 Specification for Supplementary Requirements for 1.1 This specification covers minimum-wall-thickness, Seamless and Electric-Resistance-Welded Carbon Steel seamless medium-carbon steel, boiler tubes and boiler Tubular Products for High-Temperature Service Con- flues, including safe ends (Note 1), arch and stay tubes, forming to ISO Recommendations for Boiler Con- and superheater tubes. struction NOTE 1 — This type is not suitable for safe ending by forge welding. 3. Ordering Information 1.2 The tubing sizes and thicknesses usually furnished 1 3.1 Orders for material under this specification should to this specification are ⁄ 2 in. to 5 in. [12.7 to 127 mm] include the following, as required, to describe the desired in outside diameter and 0.035 to 0.500 in. [0.9 to 12.7 mm],