SECTION 23 21 13 – hydronic piping.docVIP

MD ANDERSON Project No. XX-XXXX MD ANDERSON PROJECT NAME A/E Name Issue Description A/E Project No. Month, 00, 0000 The University of hydronic piping MD Anderson 23 21 13 MS052616 PAGE 21 of NUMPAGES 21 SECTION 23 21 13 – hydronic piping GENERAL RELATED DOCUMENTS Drawings and general provisions of the Contract, including General Conditions and Division 01 Specification Sections, apply to this Section. Specifications throughout all Divisions of the Project Manual are directly applicable to this Section, and this Section is directly applicable to them. SUMMARY Furnish and install all labor, materials, equipment, tools and services and perform all the operations required in connection with, or associated with, the construction of complete hydronic piping systems, including chilled and heating hot water piping, condenser water piping process chilled or hot water piping, condensate drain piping and generator cooling water piping systems as indicated on the Drawings. REFERENCE STANDARDS The latest published edition of a reference shall be applicable to this Project unless identified by a specific edition date. All reference amendments adopted prior to the effective date of this Contract shall be applicable to this Project. All materials, installation and workmanship shall comply with the applicable requirements and standards addressed within the following references: ANSI/ASME Sec 9  Welding and Brazing Qualifications. ASTM A53 – Standard Specification for Pipe, Steel, Black and Hot Dipped, Zinc Coated, Welded and Seamless. ANSI/ASME B16.3  Malleable Iron Threaded Fittings Class 150 and 300. ANSI/ASME B16.9 – Factory-Made Wrought Butt welding Fittings. ANSI/ASME B16.23 – Cast Copper Alloy Solder Drainage Fitting – DWV. ANSI/ASME B16.29 – Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings – DWV. ANSI/ASME B31.9  Building Services Piping. ASME B36.1 – Standardization of dimensions of welded and seamless wrought steel pipe for high or