PICC-hacmp配置v1.1.docx

PICC PowerHA 配置手册 2011/11/1 在/etc/hosts文件里添加boot ip，service ip，persistent ip 制作heart beat disk On one first side: #mkvg -C -y hbxzcbvg hdisk3 0516-1254 mkvg: Changing the PVID in the ODM. hbxzcbvg mkvg: This concurrent capable volume group must be varied on manually. On second side: #chdev -a pv=yes -l hdisk3 hdisk3 changed #importvg -y hbxzcbvg hdisk3 synclvodm: No logical volumes in volume group hbxzcbvg. hbxzcbvg 0516-783 importvg: This imported volume group is concurrent capable. Therefore, the volume group must be varied on manually. 配置拓扑： 1. smitty hacmp 2. Extended Configuration 3. Extended Topology Congfiguration(配置拓扑结构，包括网络/磁盘/串口心跳等等) 3.1 Configure an HACMP Cluster -- Add/Change/Show an HACMP Cluster(创建一个cluster) 3.2 Configure HACMP Nodes -- Add a Node to the HACMP Cluster(将cluster管理的节点加入，两个节点就需要加入两次) 3.3 Discover HACMP-related Information from Configured Nodes(发现node上的网络，心跳盘磁盘等) 3.4 Configure HACMP Networks -- Add a network to the HACMP Cluster(包括节点心跳网络/磁盘/串口) 此处，我们分别加入磁盘diskhb跟网络ether 3.5 Configure HACMP Communication Interfaces/Devices(将网络/磁盘/串口等设备一一加入) -- Add Communication Interfaces/Devices -- Add discovered Communication Interfaces and Devices -- Communication Interfaces/Devices, complete this section 3.6 Also in this section, there is a Configure HACMP Presistent Node IP Label/Addressses, means the manage IP than you can logon from outside. Others such as Configure HACMP Global/Network will rarely used. Presistent IP 就是管理IP，可以飘的，飘在一台机器的不同网卡上，跟service IP可以在两台机器之间飘有区别 配置Resource group 4. Extended Resource Configuration(配置资源组) 4.1 HACMP Extended Resources Configuration 4.1.1 Configure HACMP Application Servers 此处需要配置start,stop，monitor脚本，monitor脚本使用customer： 监控间隔： 60 稳定间隔： 30 重启次数 3 重启间隔 280 清理脚本 /appmonitor/appstop.sh 重启脚本 /appmonitor/appstart.sh 4.1.2 Configure Service IP Labels/Addresses(resource groups IP) -- Add a Service IP Label/Address -- Configurable on Mutiple Nodes -- Choose a Node -- configure this IP(Should be on /etc/hosts,