Aruba3400无线控制器配置手册范本.doc

WORD格式 编辑整理 专业知识分享 Aruba3400无线控制器配置手册 初始化配置 无线控制器初始化配置 Enter System name [Aruba3400]: Enter VLAN 1 interface IP address [54]: Enter VLAN 1 interface subnet mask []: Enter IP Default gateway [none]: Enter Switch Role, (master|local) [master]: ————————————控制器角色 Enter Country code (ISO-3166), ctrl-I for supported list: cn———————控制器所在国家代码，此选项影响 You have chosen Country code CN for China (yes|no)?: yes 可用RF channel及功率参数 Enter Time Zone [PST-8:0]: UTC8:0——————————————－时区系统（UTC、PST等）及所在时区 Enter Time in UTC [06:07:59]: 6:11:30——————————————所选时区系统的标准时间而不是本地时间， Enter Date (MM/DD/YYYY) [8/14/2011]: 否则控制器的时钟可能就不对了。 Enter Password for admin login (up to 32 chars): ****** Re-type Password for admin login: ****** Enter Password for enable mode (up to 15 chars): ****** Re-type Password for enable mode: ****** Do you wish to shutdown all the ports (yes|no)? [no]: Current choices are: System name: VLAN 1 interface IP address: 54 VLAN 1 interface subnet mask: IP Default gateway: none Switch Role: master Country code: cn Time Zone: UTC8:0 Ports shutdown: no If you accept the changes the switch will restart! Type ctrl-P to go back and change answer for any question Do you wish to accept the changes (yes|no)yes Creating configuration... Done. System will now restart! Shutdown processing started 恢复出厂设置－无线控制器 注意以下两条command的区别： (Aruba3400) #write erase All the configuration will be deleted. Press y to proceed : Write Erase successful (Aruba3400) # (Aruba3400) #write erase all Switch will be factory defaulted. All the configuration and databases will be deleted. Press y to proceed : (Aruba3400) # (Aruba3400) # (Aruba3400) #reload Do you really want to reset the system(y/n): y System will now restart! write erase只删除配置文件。而write erase all将删除配置文件、控制器内部数据库及license，将控制器重置为出厂状态。 恢复出厂设置－Aruba AP 连接AP console口至串行通讯终端（9600bits/s, 8-N-1)。