《DOS指令教学》-公开·课件设计.ppt

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Date: * * 5.各類測試程式說明 (5)USB： a.USBTEST2 : 功能說明：指定USB PORT來測試(使用USB Net Cable治具,OS為DOS Mode下)。 參數說明： UsbTest2 [No Argument] UsbTest2 Help:UsbTest ? Show this help message UsbTest2 nPorts [/Cnnn] [/2] [/P] Test ports using IDs from LIST command /C: Rounds to test, default=100 (1-1000) /2: Perform USB 2.0 test /P: Select PL-2501 cable (only when using USB 2.0)2.使用範例 usbtest 2 100 注意要點： 請搭配USB Net cable 改版過之治具驗證(單一接頭),以避免Vcc與GND 之涵概率issue Date: * * 5.各類測試程式說明 a.USBTEST2 : Date: * * 5.各類測試程式說明 (6)1394： a. OHCIROM : 功能說明：燒錄EEPROM到1394。 參數說明： 命令列 ohcirom /[command] ([filename]) ([description file]) ([program option]) Available Commands: /A or /a - Archive within SERIAL.DAT the specified offset in Hex /A:XX /C or /c - Clears every register in the EEPROM (0x00) /D or /d - Dumps the EEPROM data to the designated data file /L or /l - Log the 64-bit GUID from the EEPROM to the Standard Output /P or /p - Programs the EEPROM with the designated data file /S or /s - Sets every register in the EEPROM (0xFF) /U or /u - Updates the GUID and CRC values /V or /v - Dumps the EEPROM data for viewing on the screen Program Options: /G or /g - Allows the User to Specify