UASB+生物接触氧化法用于啤酒废水处理的工艺设计-毕业设计说明书.docx

PAGE word文档 可编辑 word文档 可编辑 毕业设计说明书 系： 能源与环境工程系 专业： 环境工程 题 目： UASB+生物接触氧化法用于啤酒废水处理的 工艺设计 指导者： (姓 名) (专业技术职务) 评阅者： (姓 名) (专业技术职务) 2017年 5 月 20 日 毕业设计（论文）中文摘要 UASB+生物接触氧化法用于啤酒废水处理的工艺设计 摘要： 设计的内容是用 UASB+生物接触氧化法处理啤酒工业废水，目的是为了不产生二次污染的情况下，使处理后的水质达到污水综合排放一级排放标准。 UASB+生物接触氧化法是现在一种实用性的处理啤酒工业废水的方法，该方法具有工艺简单、运行费用低，而且出水水质稳定等优点。整个工艺对 COD 的去除率达96.6%，对悬浮物的去除率达 97.3%－98%，该工艺非常适合在啤酒废水处理中推广应用。 本方法对设计的意义与依据和工艺的选择做了说明；并对整个工艺做了详细 的论证和说明；对各个构筑物和设备做了计算和选型；并对整个厂房进行了平面布置及经济分析概算。 关键字：啤酒废水；UASB；生物接触氧化法 word文档 可编辑 毕业设计（论文）外文摘要 Title Process Design of UASB + Biological Contact Oxidation Process for Brewery Wastewater Treatment Abstract The contents of design is to use the up-flow anaerobic sludge bed and the bio-contact oxidation which process brewery wastewater in the case of not producing the secondary pollution，so that the water quality of treated wastewater discharge to meet emission standards level. UASB and bio-contact oxidation process are now practical method which are dealing with industrial wastewater of beer. The method is simple, low operating costs, and stable water quality. The entire process on COD removal rate is up to 96.6%, and suspended solids removal rate is between 97.3% and 98%.The process is very suitable for the beer wastewater treatment application This method with the significance of the design process and the choice of basis made a statement; and has done a detailed evaluation and description; of all structures and equipment to do the calculation and selection; and carried out the whole plant layout and economic Analysis of the proposed budget. Key word: brewery waste water; UASB; biological contact oxidation process 目 录 第一章 绪论1 1.1 设计依据1 1.2 概述1 1.3 设计范围和原则2 1.4 处理规模及出水水质3 1.5 设计技术任务要求3 1.5.1 污水处理系统