斗轮堆取料机使用说明书正文(英文).doc

范文.范例.参考 PAGE WORD格式整理版 Chapter 1 Summary DQ500/1000·35 boom bucket-wheel stacker reclaimer (BWSR) is a kind of large, continuous and high efficient bulk cargo and granular material stacking and reclaiming equipment, developed, designed and manufactured by Changchun Generating Equipment Co., Ltd, China for Botswana Morupule B 4X150MW Power Station project. This “operation instruction” includes necessary data and explanation of the equipment. Main contents are as follows: performance of the equipment and technical parameter, equipment structure, operating mode and characteristic, operating regulations, safe operating regulation and maintenance as well as service etc. of the equipment. There are interlocking protection between long travel drive, luff, bucket wheel drive and boom conveyor etc transmission part (detailed information refer to the instruction in each Chapter/Section). Operator must read “Operation instruction” carefully and master daily operation and maintenance before starting to work; if operation, maintenance is improper, not only can reduce the service life of equipment, but also can cause the accident. 1.1 Brief introduction of the equipment This machine adopts integral hydraulic luffing structure. Bucket Wheel Stacker Reclaimer mainly consists of bucket-wheel mechanism, Super steel structure, boom conveyor, Main machine stairs/ladder/walkway and platform , luff unit , slew unit, long travel mechanism, slew deck, portal, Long travel, impact bracket , tripper car, ladder, walkway and platform of tripper car, dust suppression device/sprinkling device, electric room, operator’s cabin, electrical system and counterweight assembly etc; The operator’ s cab should be suspended installing on the upper part of the pylon at bucket wheel side; the super steel structure which bucket wheel mechanism, boom conveyor, operator’s cabin etc luffing parts are installed on can luff around luffing pivot; Tripper car is cross tr