GB/T 19520.9-2004电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第5-104部分:插箱及其插件 编码键.pdf

  • 6
  • 0
  • 约1.8万字
  • 约 12页
  • 2019-01-03 发布于四川
  • 正版发售
  • 被代替
  • 已被新标准代替,建议下载标准 GB/T 19520.14-2009
  •   |  2004-05-14 颁布
  •   |  2005-02-01 实施

GB/T 19520.9-2004电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第5-104部分:插箱及其插件 编码键.pdf

  1. 1、本标准文档 共12页,仅提供部分内容试读。
  2. 2、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
  3. 3、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
  4. 4、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ICS31.240 K 05 霭黔 中 华 人 民 共 和 国 国 家 标 准 GB/T19520.9-2004/IEC60297-5-104:2001 电子设备机械结构 482.6mm (19in)系列机械结构尺寸 第5-104部分:插箱及其插件 编码键 Mechanicalstructuresforelectronicequipment- Dimensionsofmechanicalstructuresofthe482.6mm (19in)series- Part5-104:Subracksandassociatedplug-inunits-Keying (IEC60297-5-104:2001,IDT) 2004-05-14发布 2005-02-01实施 中华人民共和国国家质量监督检验检疫总局 中国国家 标准化管理 委 员会 发 布 GB/T 19520.9-2004/IEC60297-5-104:2001 目 次 前言 ··········································……’’!···..·······················································…… 工 引言 ··········································。·······································································…… 11 1 范围 ·································……,·······································································…… 1 2 规范性引用文件 ··············。·······························..·.··.·..·..··…… 1 3 术语和定义 ················································································.····················.…… 1 4 在GB/T19520.3和GB/T19520.4基础上增加的扩展特性 ·······································…… 1 5 设备一般配置 ··········。·····································································.·..··············.…… 2 6 设备配置细节 ···················································································.··..·…… 3 7 插箱中的插件编码键 ··························································································……3 7.1 适用于具有面板的盒式和印制板式插件编码键的插箱导轨尺寸 ·································…… 3 7.2适用于面板不小于2倍水平格距(-2HP)的盒式和印制板式擂件编码键的插箱导轨尺寸……5 7.3适用于面板不小于3倍水平格距(-3HP)的印制板式插件编码键的导轨尺寸 ···············……5 7.4 编码键尺寸 ······。·······……,’’············,-··················..··...·········..··..·.… … 5 7.5 键的编码 ·················.···.···..·...········

文档评论(0)

认证类型官方认证
认证主体北京标科网络科技有限公司
IP属地四川
统一社会信用代码/组织机构代码
91110106773390549L

1亿VIP精品文档

相关文档