22th铝锭连续铸造机堆垛系统夹具装置设计-毕业论文.doc

毕业设计（论文） 题目22t/h铝锭连续铸造机堆垛系统夹具装置设计 系 别 专 业 班 级 姓 名 学 号 指导教师（职称） 日 期 PAGE 摘 要 为了解决铝锭有规则排列及紧密搭接，并为码垛机高效堆垛和进行成品运输做好准备，并结合铝锭的堆垛作业，对现有的各种结构形式堆垛机解剖和分析，并在此基础上应用机械设计和创造学，在机、电、液、气一体化的设计设计思想指导下，我们提出了20kg铝锭堆垛机设计的总体方案。本文主要介绍堆垛机各部件的动作及控制设计，特别是堆垛系统夹具装置。本次设计的堆垛机保留了以前堆垛机的优点，并对其缺点进行了改进，同时采用计算机和PLC实现远端控制，使堆垛机更加完善，从而达到降低人工劳动强度、自动高效铝锭堆垛作业，提高生产率。 关键词：铝锭堆垛机；夹具装置；PLC远端控制 ABSTRACT In order to solve the aluminum ingot has the regular array and close joining, and piles up and carries on the end product transportation for the stacker highly effective to be ready, and in light of the piling up work of aluminum ingot, to various existing structural style hay stacker dissections and analyses, and applies the machine design and creation study based on this, in the design design concept instruction of machine, electricity, fluid and under gas integration, we proposed the general scheme of 20kg aluminum ingot hay stacker design. The movements and control design of various this article main introduction hay stacker parts, especially pile up the system fixture device. The hay stacker of this design retained the merit of beforehand hay stacker, and has made the improvement to its shortcoming, simultaneously uses the computer and PLC realizes the far-end control, improving the hay stacker, thus achieves to reduce the hand labor intensity and automatic highly effective aluminum ingot to pile up the work, productivity gain. Key word: aluminum stacker; clamp device； PLC remote control 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc349767949 摘 要 PAGEREF _Toc349767949 \h I HYPERLINK \l _Toc349767950 ABSTRACT PAGEREF _Toc349767950 \h II HYPERLINK \l _Toc349767951 1 绪论 PAGEREF _Toc349767951 \h 1 HYPERLINK \l _Toc349767952 1.1 课题背景 PAGEREF _Toc349767952 \h 1 HYPERLINK \l _Toc349767953 1.2 国内外研究现状 PAGEREF _Toc349767953 \h 1 HYPERLINK \l _Toc349767954 1.2.1 国外研究现状 PAGEREF _Toc349767954 \h 1 HYPE