2019年智能家居安防系统的设计与制作.docVIP

陕西理工学院毕业设计 PAGE I 智能家居安防系统的设计与制作 [摘要]本设计主要以单片机AT89S51为智能控制中心，结合烟雾检测模块、火灾检测模块、人为非法入侵检测模块及声控报警模块，及其外围辅助电路，构成了一个集防盗、防火、防毒气等多种检测功能为一体的多功能防盗报警系统。首先由各传感器检测烟雾、火灾及人为非法入侵信号，当检测到的信号超出自身的设定值时，将其转化为电信号并传送给单片机处理，再由单片机将电信号传送给蜂鸣器驱动其报警。该系统具有轻便灵巧、电路简单易实现，所使用的各类元器件灵敏度较高的特点。利用单片机编程，可使电路功能易于控制，从而实现了识别不同警情的具有智能报警的家居报警系统。 [关键词]AT89S51单片机; HC-SR501；DS18B20数字温度模块；智能报警：热释电 Design of Intelligent Home Furnishing Security System [Abstract]This design mainly with AT89S51 single chip computer as the control center, combined with smoke detection module, fire detection module, human intrusion detection module and the voice alarm module, and its auxiliary circuit, constitutes a set anti-theft, fire, gas and other detection the multifunctional anti-theft alarm system. First of all , the sensors detect smoke, fire and human intrusion signal, when the detected signal exceeds the set value, the sensors will transform it into an electric signal and transmit it to the MSC for processing, and the transmit electrical signals will be transmitted to the alarm buzzer for driving. The system is portable and flexible, the circuit is simple and easy to implement, used by various components of high sensitivity characteristic. The use of MSC programming, can make the function of the circuit is easy to control, thus realizing the pyroelectric sensor to detect illegal invasion, gas sensor for detection of gas and other harmful gases, temperature sensor for detecting the fire. [Key words] AT89S51; HC-SR501；DS18B20；MQ-2 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc326745999 引言 PAGEREF _Toc326745999 \h 1 HYPERLINK \l _Toc326746000 1.系统方案设计 PAGEREF _Toc326746000 \h 2 HYPERLINK \l _Toc326746001 1.1报警系统的组成及结构 PAGEREF _Toc326746001 \h 2 HYPERLINK \l _Toc326746002 1.2模块方案选择 PAGEREF _Toc326746002 \h 2 HYPERLINK \l _Toc326746003 1.2.1控制模块 PAGEREF _Toc326746003 \h 2 HYPERLINK \l _Toc326746004 1.2.2电源模块 PAGEREF _Toc326746004 \h 2 HYPERLINK \l _Toc326746005 1.2.3烟雾检测模块 PAGEREF _Toc326746005 \h 3 HYPERLINK \l _T