垃圾焚烧工艺流程图.doc

本系统从垃圾投入开始到最后的出灰，整个系统全部自动程序控制。这不仅减少了操作人员，而且保障了系统安全稳定运行，达到最好的垃圾处理效果。 The system is mainly about the disposal of urban household garbage and non-toxicharmless industrial trashthrough the advanced, reliable, mature production technology and technical equipment. After the comprehensive implementation, we can realize the purpose of changing the reduced garbage into resources in a harmless way. Also,the heat energy generated out of garbage incineration can be used in heating and power supply. The chemical equilibrium and fludic analysis of gas as well as the precise equipment selection and temperature enaction shall be executed according to garbage contents at the design stage. From primary garbage input to final ash output , the whole system is controlled by automatic program, which not only cuts the workforce, but also ensures the system safety and steady operation, thus achieving the best garbage disposal effect. 垃圾焚烧工艺流程图 Process Flow Of Grbage Incineration 城市生活垃圾剔除不可燃烧及有毒有害的废弃物后，由专用垃圾运输车辆送进厂区，驶上地磅进行称重，然后按指定路线驶向垃圾卸料平台，将垃圾卸入垃圾贮存池可贮存5~7天的处理量，贮存池上方设有垃圾吊，对池内垃圾进行搬运、搅拌和倒垛，以确保入炉垃圾组分均匀。 Having eliminated incombustible and noxious waste, the urban household garbage is sent to the factory by special garbage carrier. After weighed on weigh bridge, special garbage carrier is drived to garbage discharging platform, where garbage shall be unloaded into storage pool whch has the storing capacity for 5-7 days. There are two garbage cranes above storage pool for hauling ,stirring up and shifting to ensure the evenly distribution of the incinerated garbage. 垃圾焚烧系统包括从垃圾吊车接到垃圾后送至二次燃烧室进行燃烧以及垃圾焚烧炉出渣。焚烧炉的种类很多，焚烧工艺也因焚烧炉的不同而各有差别，本项目将采用国际先进的往复式机械炉排炉，它分为干燥段、燃烧段、燃烬段。根据各段供应的空气量和调节推进的速度，适时掌控炉膛温度，提高垃圾燃烬率。 The incineration system covers the process of collecting garbage from carrier ,sending it to re-combustion space and then discharging the slag out of incinerator.there are many kinds of incinerators, Incineration technology differs by incinerators. Using the most advanced inte