GOST 183-1974 旋转电机一般技术要求.pdfVIP

U S S R S T A T E S T A N D A R D ROTATING ELECTRICAL MACHINES GENERAL SPECIFICATIONS GOST 183–74 Official Edition USSR STATE COMMITTEE FOR STANDARDS Moscow UDC 621.313.281: 006.354 Group E60 U S S R S T A T E S T A N D A R D GOST 183-74* ROTATING ELECTRICAL MACHINES (CMEA Standard 1346-78) General Specifications In place of GOST 183–66 OKP (All-Union Product Classification Code) 33 0000 Period of validity set by Decree No. 2822, dated December 27, 1974, of the State Committee for Standards under the USSR Council of Ministers from 01.01.1976 to 01.01.1982 Failure to comply with this Standard will result in legal proceedings This Standard applies to rotating electrical machines of direct and alternating current irrespective of power, voltage or frequency. The Standard does not apply to electrical machines intended for use in the onboard systems of mobile vehicles of surface, water and air transport. The Standard fully corresponds to CMEA Standard 1346-78 (Amended Wording, Amendment No. 1). This Standard takes into account the requirements of IEC Publication 34-1 (1969). 1. TECHNICAL REQUIREMENTS 1.1. Electrical machines shall be manufactured in compliance with the requirements of