600伏以上配电系统用可分绝缘连接器系统.pdf

IEEE Std 386-1995 (Revision of IEEE Std 386-1985) IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600 V Sponsor Transmission and Distribution Committee of the IEEE Power Engineering Society Approved March 16, 1995 IEEE Standards Board Abstract: Definitions, service conditions, ratings, interchangeable construction features, and tests are established for load-break and dead-break separable insulated connector systems rated 601 V and above, 600 A or less, for use on power distribution systems. Keywords: dead-break connector, elbow connector, load-break connector, power distribution systems, separable conductor, separable insulated connector systems The Institute of Electrical and Electronics Engineers, Inc. 345 East 47th Street, New Y ork, NY 10017-2394, USA Copyright ? 1995 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 1995. Printed in the United States of America. ISBN 1-55937-530-2 No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. IEEE Standards documents are developed within the Technical Committees of the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Board. Members of the committees serve voluntarily and without compensation. They are not necessarily members of the Institute. The standards developed within IEEE represent a consensus of the broad expertise on the subject within the Institute as well as those activities outside of IEEE that have expressed an interest in partici- pating in the development of the standard. Use of an IEEE Standard is wholly voluntary. The existence of an IEEE Stan