5KP瞬态抑制二极管.pdf

Transient Voltage Suppressors Diodes Axial Leaded - 5000W 5KP5.0~190CA Series The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features P600 unit:inch(mm) ? Halogen-free ? Rohs compliant ? Typical maximum temperature coefficient BR = 0.1% xΔV V BR @25° C x ΔT ? Glass passivated Chip junction in P600 package ? 5000W peak pulse capadility at 10 × 1000 μswaveform, repetition rate(duty cycles):0.01% ? Fast response time:typically less than 1.0ps from 0 Volts to BV min ? Excellent clamping capability ? Low incremental surge resistance ? Typical I R less than 5 μA above 12V ? High temperature soldering guaranteed: 260 ° C/40 seconds /0.375 ” ,(9.5mm) lead length, 5lbs., (2.3kg) tension ? Plastic package has underwriters laboratory flammability classification 94v-0 Applications TVS devices are ideal for the protection of I/O interfaces, V CC bus and other vulnerable circuits used in telecom,computer, industrial and consumer electronic applications. Maximum Ratings And Characteristics (TA=25 ° C unless otherwise noted) Rating Symbol Value Units Peak Pulse Power Dissipation by 10x1000 μs test PPPM 5000 Watts waveform (Fig.1)(Note 1) Steady State Power Dissipation on 8 Watts inifinite heat sink at TL=75oC (Fig. 5)