毕业论文--LED照明系统设计.docVIP

毕业论文--LED照明系统设计 目 录 摘 要 I Abstract II 1 绪 论 1 1.1 引言 1 1.2 国内外现状与发展趋势 1 1.3 研究的目的与意义 2 1.4 研究的内容 3 2 LED光源与传统光源的比较 4 2.1 传统光源的优缺点 4 2.2 LED光源的优缺点 4 3 对光场的要求以及光场模拟 7 3.1 道路照明指标及采取的方案 7 3.2 LED光源的光强分布以及光场模拟 9 3.3 LED照明系统的二次设计 10 4 总 结 16 致 谢 17 参考文献 18 摘 要 发光二极管 LED，Light Emitting Diode 被认为是人类历史上继火焰、白炽灯、荧光灯之后的第四代光源。基于节能的需要以及人们对照明质量要求的不断提高，半导体照明光源以其高效节能、长寿命、色彩丰富和环保等特点受到了人们的广泛关注。在照明领域，主要关心的问题是如何将光能高效地投射到目标面上，并在照射目标上实现特定方式的照明。通过一系列的设计与调整，制造出高效的LED照明系统，从而让LED走进人们的生活成为可能。 本文介绍了LED照明特点、光场分布、道路照明指标以及采取的一些控制措施，并以LED路灯设计为实例，采用区域分割的思想对LED路灯进行光学设计，让指定的LED照射到特定的区域，通过这些照明区域的叠加实现道路的均匀照明，最终得到满意的结果。设计结果经过ASAP软件仿真和实际测量均达到了道路照明标准中的要求。 关键字：发管二极管照明 道路照明 二次光学设计 发光二极管路灯 LED Lighting System Design Abstract Light Emitting Diode LED is considered as the fourth-generation light source after Flame，Incandescent and Fluorescent in the history of mankind．With the demand of energy saving and the requirement for higher lighting quality, semiconductor lighting sources have been concerned for its excellent characteristics: high efficient and energy saving, long life, rich colors and environmental protection ect. In the lighting field, the main concern is how to efficiently light projected onto the target surface, and the irradiation target on the way to achieve a particular lighting. Through a series of design and adjustment, to create a highly efficient LED lighting system, so that LED into peoples lives possible. This paper introduces the characteristics of LED lighting, light distribution, lighting a number of indicators and Program adopted, and to design LED lamps as an example, a regional division of thought on the LED lamp for optical design, LED light so designated to a specific area, through the illumination path of stacking area uniform illumination. ASAP software design results through simulation and actual measurement are met the requirements of road lighting standards. Keywords: LED lighting; Road lighting ; Secondary optics design; LED lamps 1 绪 论 1.1 引言 187