重庆松藻煤电公司打通一矿产万吨新矿井初步设计方案资料.docVIP

个人收集整理 勿做商业用途 个人收集整理 勿做商业用途 PAGE / NUMPAGES 个人收集整理 勿做商业用途 重庆大学本科学生毕业设计 重庆松藻煤电公司打通一矿(1200kt/a)新矿井初步设计 学 生： 杨雪原 学 号： 指导教师： 黄滚 助理指导教师： 专 业： 采矿工程 重庆大学资源及环境科学学院 二O一三年六月 Graduation Design of Chongqing Primary Design of Datong No.1 Mine (1200kt/a),Songzao Coal Electric Co.Ltd. College of Resources and Environmental Science Chongqing June 2011 摘 要 这次毕业设计的题目是松藻煤电有限责任公司打通一煤矿(1200kt/a)的初步设计。该处的井田内地质构造比较简单，是一个高瓦斯矿井，它的煤尘具有爆炸性，并且煤层为不易自燃类；此矿井可采煤层为三层，由浅到深分别为M6-3、M7-2、M8，它们各自煤层的平均厚度分别为0.88m，1.08m，2.25m，煤层倾角3°～12°，平均倾角10°，均为近水平煤层。 本次设计是在松藻煤电有限责任公司打通一煤矿实习一周后，在其基础上，以打通一矿总体开发方案为根本，结合煤矿地质条件、煤层赋存条件和目前生产设备等条件，再遵循国家规程等设计文件规定，对本矿井进行初步设计。本设计中，矿井开拓方式为主、副斜井—副立井综合开拓，通风方式采用的是混合式通风。对设计煤层M7-2选用倾斜长壁式仰斜采煤法，煤层开采采用综合机械化采煤工艺，采煤工作面实行“三八”作业制，采用“两采一准”的作业方式。 通过对经济技术进行比较过后，其设计的开拓方案、采煤方法及相关机械设备均能满足矿井1200kt/a生产能力的开采要求。 关键词：打通一矿，矿井初步设计，1200kt/a，近水平煤层，斜、立井综合开拓，综合机械化开采 ABSTRACT The thesis of this graduation design is “The Preliminary Design of Datong No.1 Mine(1200kt/a),Songzao Coal and Electric Co.Ltd.”and its geologic structure is simple. And it is a high-gas coal mine,the coal is explosive, its spontaneous combustion of coal seam is not easy burned.The coal mine which is designed have three layers.From shallow to deep,the burying depth is M6-3 coal seam, M7-2 coal seam and M8 coal seam,their average thickness is 0.88m,1.08m and 2.25m,their angle of dip is 3o～12o,the average is 10o . They are all horizontal seams. After practicing in Datong No.1 Mine,Songzao Coal and Electric Co.,Ltd.. On this basis,according to the field experiments, the geologicl conditions, occurrence conditions of coal seams and the existing production equipment technical conditions, following the national regulations,summary all above to design the mine. In the design, the coal mine whose explore way is opened by the combined development method with inclined shaft-shaft. The ventilation mode of the coal mine is mixed,the method of mining to the rise in the inclined longwall mining is used in the design c