基于PT2262的无线灯控设备设计实现.doc

基于PT2262的无线灯控设备设计 PAGE PAGE 32 基于PT2262的无线灯控设备设计 指导教师 摘要：随着信息技术不断的飞速发展和社会的不断进步，人们对照明的高效控制和功能多样化要求也不断提高，智能照明系统应运而生。它是充分利用电子技术、通信技术将建筑物内的各种照明器件有机的连接在一起，实现有效的管理和控制。本论文的主要工作是设计制作了无线遥控的灯控设备，采用了以PT2262/PT2272为主控芯片来实现软件编码及解码方法。本设计课题从PT2262的波形入手，分析其编码格式，采用了单片机程序来模拟PT2272的解码，同时给出了硬件设计电路和软件结构，详细叙述系统硬件线路的设计要点和软件设计。通过对系统进行的各个功能模块的软硬件调试以及系统综合调试，硬件电路的制作达到系统的总体要求，从而实现了单片机的学习功能和无线遥控的应用。矚慫润厲钐瘗睞枥庑赖賃軔朧碍鳝绢懣硯涛镕頃赎巯驂雞虯从躜鞯烧论雛办罴噓剥淚軔琿閔馐虯圓绅锾潴苏琺锅苁。 关键词：无线遥控；硬件电路；软件解码；编码波形 Base on PT2262 wireless light control equipment design聞創沟燴鐺險爱氇谴净祸測樅锯鳗鲮詣鋃陉蛮苎覺藍驳驂签拋敘睑绑鵪壺嗫龄呓骣頂濺锇慪柠圖虬辏獨鰷濱賺钓崳。 Electronic science and technology Guiding teacher Abstract:With rapid development of information technology and progress of society, the demand on efficient control and various function of illumination by people is improved, thus intelligent illumination system comes out. Technology of electronic should be good used, to make sure that communication and computer network and combines different lighting implements get efficient controlled and managed.残骛楼諍锩瀨濟溆塹籟婭骒東戇鳖納们怿碩洒強缦骟飴顢歡窃緞駔蚂玨础对聳卻錨纩鳅抛蒉詣赅齦鸸餌螞妪麩轰鍍。 The primary job of the essay is to ger the lamp of the wireless remote control based on signed chip microcomputer control equipment designed,PT2262/PT2272 is one of the most common chips at the present time, but because the chips require pairing, so this aspect influences its application in a large scale.PT2262 waveform from the start,the design issues, analysis of its encoding format, the use of the mircrontroller program to simulate the PT2272 decoder, given the hardware circuit and software architecture, a detailed description of the design features of the system hardware circuit and software design. Hardware and software debugging and system debugging through the various functional modules of the system, the hardware circuit of production to achieve the overall system requirements in order to achieve the learning function of the microcontroller and wireless remote control applic