锤式破碎机使用说明书.doc

第 PAGE 2 页 共 NUMPAGES 11 页 锤式破碎机Hammer crusher Manual 使用说明书 河南宏基矿山机械有限公司 HENAN HONGJI MINE MACHINERY CO.,LTD 电话TEL：0371 传真FAX：0371网址WEBSITE：http:// use 用途 Hammer Crusher is applicables for mid-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa /mm2 and humidity lower than 2%, such as coal, alum, gypsum, blocks, limestone, etc.本机适用于破碎各种脆性材料的矿物，破碎物料为煤、石膏、明矾、砖瓦、石灰石等。其料的抗压强度不超过1000公斤力/厘米2，湿度不大于2％。 主要技术参数Main technical parameters model Fedding size（mm） Discharging size（mm） capacity（t/h） motor（kw） weight（kg） PC400x300 ≤100 ≤10 5-10 7.5 600 PC600x400 ≤120 ≤15 10-25 18.5 1500 PC800x600 ≤120 ≤15 20-35 55 3100 PC1000x800 ≤200 ≤13 20-40 115 7900 PC1000x1000 ≤200 ≤15 30-80 132 8650 PC1300x1200 ≤250 ≤19 80-200 240 13600 structure compendium机构简述 The main parts and components od hammer crusher are rack .rotor .screen and hammer and etc. The motor drives the rotors by elastic coupling, Raw materials are crushed by the impact power ,while rotor is rotating 本机主要由机架、转子、筛子、锺子等零件、部件组合而成，电动机通过弹性联轴节直接驱动转子，物料由于转子旋转时所产生的锤头对物料的撞击作用而破碎。 There are two parts of rack, upper cover and underplate.the protect liner fixed in the wall to protect the wear of the inner –rack ,there are four small gates fixed in the rack .the double small gates which on top-rack are to clean up the hard- crumbled materials.the other double ones which on the fore and back wall are stand-by to observe and clean grate bar. 机架分上盖和下座两部分，内壁装有防护衬板，以防止机架内部磨损，机架上装有四扇小门，位于上架的壁上的小门，用于调节破碎板后壁的小门，用作清除不易破碎的物料。下座前后壁上的两扇小门则是备作察看和清理筛条之用。 Rotor is composed by rotor shaft. Trigonal plate.disk.bearing. hammer axle.hammer .etc. Rotor shaft fixes trigonal plate and disk which seperated by axile bush. The bearing and hammer are fixed on the plate. Hammer hangs on the bearing ,it will rotating while the rotor shaft rotating . 转子是由转子轴、三角盘、园盘、锤轴、锤子等零件组成。转子轴上装有三角盘和园盘、盘与盘之间以轴套隔开，盘上装有锤轴、锤子悬挂在锤轴上，当转子轴旋转时，锤子即随着回转。 Grate bar is seted in the slot of screen rack which in the