基于51单片机的红外遥控开关设计.doc

电子与信息工程学院 本 科 毕 业 设 计 论文题目 基于51单片机的红外遥控 开关设计 学生姓名 学 号 专 业 电子信息科学与技术 班 级 指导教师 2010年5月 西安交通大学硕士学位论文 摘 要 PAGE 17 摘 要 本设计是基于红外遥控和AT89C51单片机控制的红外遥控开关，这种系统具有很强的适用性、灵活性、先进性,它的应用大大方便了人们的生活。本文给出了系统的硬件组成和硬软件设计方法，介绍了解码程序的基本结构和程序框图，为达到准确控制，将发射脉冲分为连接段、控制段和结束段等3部分，并再接收端进行校验。整个系统由发射和接收两个部分组成。发射部分包括键盘矩阵、编码调制、LED红外发射管；接收部分包括LED红外光接收器、解调、解码电路。系统在实际实用后，证明其方便、可靠并具有实用价值。 关键词：AT89C51芯片；红外遥控开关 咸宁学院学士学位论文 ABSTRACT PAGE 14 ABSTRACT The design of an infrared remote-control multi-line switch is introduced.This switch is based on principle of infrared remote-control and AT89C51 single chip microcomputer controlling .This system has strong applicability,flexibility and advancement.Peoples life is improved greatly by Its apply. Its system composition and design of hardware and software are presented. The basic structure and chart of control decode program are also expounded. In order to achieve exact remote-control, the transmitted signal is divided into 3 parts:the connecting section, the controlling section and the ending section, then the receiver will verify it.The whole system is composed by the launches partially and the receives partially two parts.Launches partially including the keyboard matrix,the coded modulation,the LED infrared transmitter;Receives partially including the LED infrared light receiver,the demodulation,decodes the electric circuit. It was proved that this kind of remote-control is convenient, reliable and practical after using in remote-control system. Key words: the chip of AT89C51; infrared remote-control switch 目 录 目 录 TOC \o 1-3 \h \z \u 1 绪 论 1 1.1 课题背景 1 1.2 应用前景 1 2 总体设计方案 3 2.1 机型及元器件选择 3 2.1.1 单片机的选择 3 2.1.2 AT89C51单片及的硬件结构 3 2.2 软、硬件功能划分 4 2.3 总体方案设计 5 3 系统的设计 7 3.1 系统硬件设计 7 3.1.1 硬件要求 7 3.1.2 键盘接口 9 3.1.3 LED显示器 10 3.1.4 发射部分 12 3.1.5 接收部分 12 3.2 系统软件设计 13 3.2.1