豪情汽车制造企业生产线平衡的研究.pdf

内容 摘 要 制造业生产多半是在进行细分之后的多工序流水连续作业生产 线上进行的,此时由于分工作业,简化了作业难度,使作业熟练度得到 提高,从而提高了作业效率.然而,经过了这样的作业细分化之后,各 工序的作业时间在理论上、现实上都不能完全相同,这就势必存在工 序间作业负荷不均衡的现象.除了造成无谓的工时损失外,还造成大 量的工序堆积,严重时会造成生产线的中止.本文通过应用基础工业 工程知识，依据起生产设计，工艺流程，平面图布置，生产纲领等 有关资料，通过对企业流程分析,动作分析和生产线平衡分析，力争 减少企业的成本，提高企业的经济效率。 关键词：工业工程，工作研究，流程分析, 动作分析，生产线平衡 I ABSTRACT Manufacturers are mostly in sub-processes more water after the continuous operation of the production line, at this time due to division of work, simplifying the operation difficult, so that operations improved, thereby enhancing the operational efficiency. However, after the This segmentation of the operation, the operating procedures of the time, in theory, in reality are not identical, which is bound to exist between the processes operating load imbalance phenomenon. In addition to causing unnecessary loss of working hours, also caused a lot of work stacking , Will cause serious suspension of the production line. In this paper, basic industries through the application of engineering knowledge, based on production from design, process, the floor plan layout, production program, and other relevant information, through the business process analysis, motion analysis and the balance of production lines in order to reduce the enterprise The cost and increase the economic efficiency of enterprises. KEYWORDS： Industrial engineering, work study, flow analysis, motion analysis, balance production line II 正文目录 第一章 引言 1 第一节 选题背景 1