经典的delmia学习资料,从装配学起.pdf

DELMIA - GETTING STARTED DELV5-01/Rev0 First Edition –August 2010 DS Support White PAPER © Dassault Systèmes WW Support |/support Abstract The objective of this document is to familiarize the reader and student with the basic principles and techniques used in the DELMIA DPM Assembly Process Simulation workbench. The exercises will focus on the simulation of the assembly of a Stratocaster guitar. This exercise will build a product from its individual component parts laid out on a workbench. In DELMIA terminology, the product is the actual part or assembly of parts that are being worked upon. The product can be thought of as the object or objects being manufactured, moving through an assembly line. Introduction Throughout the paper, the reader will use CATIA CATParts and CATProducts to simulate a typical assembly process in a manufacturing environment. Simulating the process allows the manufacturing engineers to design, review and validate digital plant floor layouts and assembly lines. At the completion of these exercises the student will have a process defined that is suited for the next step in shop floor simulation- Human Builder. All the required data files for this training document are included in the “TR-1_DELMIA.zip” file, making the reader’s hands-on experience as realistic as possible. © Dassault Systèmes WW Support |/support DELMIA –Getting Started Page 2 Contents I. DELMIA –Getting Started4 II. Start DPM Assembly Process Workbench 6 III. Insert Resources – Plant Floor Workbench 7 IV. Insert Product –Strat Assembly R19 8 V. Save Initial State and Hide/Show Plant F