材料与试验协会 A 366-1997冷轧商用钢（CS）板（0.15最大百分比）的标准规范1.pdf

Designation: A 366/A 366M – 971 AMERICAN SOCIETY FOR TESTING AND MATERIALS 100 Barr Harbor Dr., West Conshohocken, PA 19428 Reprinted from the Annual Book of ASTM Standards. Copyright ASTM Standard Specification for Commercial Steel (CS) Sheet, Carbon, (0.15 Maximum Percent) Cold-Rolled1 This standard is issued under the fixed designation A 366/A 366M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. 1 NOTE—Table 1 (Nickel — Type B) was corrected editorially in October 1998. 1. Scope standards, refer to Specification A 568/A 568M.