美国材料协会标准 A368 - 95a (2019).pdf

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. Designation: A368 − 95a (Reapproved 2019) Standard Specification for Stainless Steel Wire Strand1 This standard is issued under the fixed designation A368; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval. 1. Scope 3.1.5 Number of wires per strand (Table 1), 1.1 This specification covers stainless steel wire strand 3.1.6 Minimum breaking strength (medium or high composed of a multiplicity of round wires and suitable for use strength), as guy wires, overhead ground wires, and similar purposes. 3.1.7 Type designation (see Section 7), 3.1.8 ASTM designation, and date of issue, and 1.2 The values stated in inch-pound units are to be regarded 3.1.9 Special requirements, if any. as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only NOTE 1—A typical ordering description is as follows: 1000 ft, stainless