(高清) NACE MR0103-2015 美国标准.pdf

Item No. 21305 International Standard ANSI/NACE MR0103/ISO 17495-1:2016 Petroleum, petrochemical and natural gas industries —Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments Élément introductif —Élément central —Élément complémentaire An American National Standard Approved November 23, 2015 Reference number AN SI / N A C E M R 0 1 0 3 / I S O 1 7 4 9 5 : 2 0 1 6 © ANSI/NACE/ISO 2016 COPYRIGHT PROTECTED DOCUMENT These materials are subject to copyright claims of ISO and NACE. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of NACE. All requests pertaining to the ANSI/NACE MR0103/ISO 17945 standard should be submitted to NACE. All rights reserved. International Organization for Standardization (ISO) ISO Central Secretariat BIBC II Chemin de Blandonnet 8 CP 401 1214 Vernier, Geneva Switzerland Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 Web: www.iso.ch NACE International 15835 Park Ten Place Houston, TX 77084-5145 Tel. +1 281-228-6223 Fax +1 281-228-6300 Web: Printed in the U.S.A. by NACE International © NACE/ISO 2015 1 Contents Page Foreword 5 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 Symbols and abbreviated terms 9 5 Responsibilities 9 5.1 Responsibilities of the end user 9 5.2 Responsibility of the manufacturer 10 6 Factors contributing to SSC 10 6.1 General parameters af