- 1、本文档被系统程序自动判定探测到侵权嫌疑,本站暂时做下架处理。
- 2、如果您确认为侵权,可联系本站左侧在线QQ客服请求删除。我们会保证在24小时内做出处理,应急电话:400-050-0827。
- 3、此文档由网友上传,因疑似侵权的原因,本站不提供该文档下载,只提供部分内容试读。如果您是出版社/作者,看到后可认领文档,您也可以联系本站进行批量认领。
查看更多
ICS 45.060.01
S 30
TB
Railway Professional Standards of the People’s Republic of China
TB/T 3139—2006
Decorating materials and indoor air limit of harmful substance for rolling stock
Issued on Nov. 29th, 2006 Implemented on May 1st, 2007
Issued by Ministry of Railways of the People’s Republic of China
TB/T 3139—2006
Contents
Preface II
1 Scope i
2 Normative references 1
3 Limit of harmful substance, test methods and inspection rules of the decorating materials 1
3.1 Structural material 1
3.2 Decorating materials 1
3.3 Adhesive 2
3.4 Paint 2
3.5 Rubber and plastic products 3
3.6 Textile 4
3.7 Carpet 4
4 The limit and test methods of formaldehyde and total VOC in indoor air 4
Appendix A (Normative) Conversion of ppm and mg/m3 of formaldehyde at different temperatures 7
I
TB/T 3139—2006
Preface
Appendix A of this standard is normative.
This standard is proposed by and under the centralized management of Research Institute of Standards and Measurement, Ministry of Railways.
Drafting units of this standard: Metals and Chemistry Research Institute of Academy of Railway Sciences, Research Institute of Standards and Measurement of Ministry of Railways and Research Institute of CNR Sifang Rolling Stock.
This standard is mainly drafted by: Wu Shaoli, Cheng Danren, Cui Dongfang, Zhang Xianqing, Yu Quanlei.
II
TB/T 3139—2006
Decorating Materials and Indoor Air Limit of Harmful Substance for Rolling Stock
1 Scope
This standard specifies the limit of harmful substance, test methods and inspection rules of the decorating materials in passenger compartments and cabs for railway rolling stock. It also specifies the limit of harmful substance and test methods in the air inside passenger compartments and cabs.
This standard is applicable for the decorating materials and indoor air limit and inspection of harmful substance in passenger compartments and cabs for railway rolling stock with max. operating speed below 200 km/h.
2 Normative references
The following normative document
您可能关注的文档
- 英文版中国标准 HGT 3088-1999.doc
- 英文版中国标准GB 50017-2003.doc
- 中文版日本标准 JIS G5502-2001_Spheroidal_graphite_iron_castings.doc
- 英文版中国标准 TBT 3094-2004.doc
- 英文版中国标准 TBT 2591-2007.doc
- 英文版中国标准 TBT 2433-1993.doc
- 英文版中国标准 TBT 1957-1991.doc
- 英文版中国标准 TBT 1804-2009.doc
- 英文版中国标准 TBT 1484.4-2010.doc
- 英文版中国标准 TBT 1484.1-2010.doc
- 福建省福州屏东中学2024-2025学年九年级上学期九月月考数学试题.docx
- 上海市桃浦中学2025届高三上学期阶段性评估(9月)数学试卷.docx
- 上海市杨浦高级中学2024-2025学年高三上学期9月测试 化学试题(无答案).docx
- 江苏省徐州市睢宁县2023-2024学年九年级上学期期中考试英语试题.docx
- (1_2单元)第一次月考试卷(试题)-2024-2025学年四年级上册数学人教版.docx
- 河南省开封市兰考县第二高级中学2024-2025学年高二上学期月考物理试题‘.docx
- 江苏省苏州市2024-2025学年高三上学期开学考试化学试题(无答案).docx
- 四川省内江市第一中学2023-2024学年八年级上学期开学考试语文试题.docx
- 江苏省镇江市丹阳市第八中学2023-2024学年八年级上学期期中英语试题(无答案).docx
- 海南省琼海市2021-2022学年九年级上学期期末教学质量监测英语试题.docx
最近下载
知传链电子书
- 增加5轴雕刻加工(HSS_Proj_faces8)-[共3页]-289-SolidCAM+SolidWorks 2014中文版数控加工从入门到精通-人民邮电出版社-赵罘 杨晓晋 刘玥 编著.pdf
- 增加平行与曲线加工(HSS_Parc_faces6)-[共6页]-283-SolidCAM+SolidWorks 2014中文版数控加工从入门到精通-人民邮电出版社-赵罘 杨晓晋 刘玥 编著.pdf
- 增加5轴雕刻加工(HSS_Proj_faces4)-[共7页]-276-SolidCAM+SolidWorks 2014中文版数控加工从入门到精通-人民邮电出版社-赵罘 杨晓晋 刘玥 编著.pdf
- 增加平行切削:直线加工(HSS_Lin_faces2)-[共4页]-272-SolidCAM+SolidWorks 2014中文版数控加工从入门到精通-人民邮电出版社-赵罘 杨晓晋 刘玥 编著.pdf
- 增加平行切削:直线加工(HSS_PC_Lin_faces)-[共6页]-266-SolidCAM+SolidWorks 2014中文版数控加工从入门到精通-人民邮电出版社-赵罘 杨晓晋 刘玥 编著.pdf
- 定义剩余的3个坐标系-[共5页]-258-SolidCAM+SolidWorks 2014中文版数控加工从入门到精通-人民邮电出版社-赵罘 杨晓晋 刘玥 编著.pdf
- 增加袋状加工(P_contour52)-[共4页]-247-SolidCAM+SolidWorks 2014中文版数控加工从入门到精通-人民邮电出版社-赵罘 杨晓晋 刘玥 编著.pdf
- 增加两曲线之间仿型铣(HSS_MC_faces52)-[共5页]-242-SolidCAM+SolidWorks 2014中文版数控加工从入门到精通-人民邮电出版社-赵罘 杨晓晋 刘玥 编著.pdf
- 增加两曲线之间仿型铣(HSS_MC_faces50)-[共5页]-237-SolidCAM+SolidWorks 2014中文版数控加工从入门到精通-人民邮电出版社-赵罘 杨晓晋 刘玥 编著.pdf
- 增加两曲线之间仿型铣(HSS_MC_faces48)-[共5页]-232-SolidCAM+SolidWorks 2014中文版数控加工从入门到精通-人民邮电出版社-赵罘 杨晓晋 刘玥 编著.pdf
文档评论(0)