RG 5.60-80 相关标准章节.docx

Publication Date: 4/1/80  Pages: 39  Date Entered: 2/23/84  Title: STANDARD FORMAT AND CONTENT OF A LICENSEE PHYSICAL PROTECTION PLAN FOR STRATEGIC SPECIAL NUCLEAR MATERIAL IN TRANSIT  April 1980  U.S. NUCLEAR REGULATORY COMMISSION  REGULATORY GUIDE  OFFICE OF STANDARDS DEVELOPMENT  REGULATORY GUIDE 5.60  STANDARD FORMAT AND CONTENT OF A LICENSEE  PHYSICAL PROTECTION PLAN FOR STRATEGIC SPECIAL NUCLEAR  MATERIAL IN TRANSIT  Use of the Standard Format  The licensee should follow, as nearly as possible, the numbering  system of the Standard Format in Parts I and II of this guide. if  certain subsections are not applicable, this should be clearly stated  and sufficient information should be provided to support that  conclusion. The licensee may expand on the information provided, as  necessary, to adequately cover any safeguards measures unique to the  licensees operation.  Upon completing the plan, the licensee should use the table of  contents of the Standard Format as a checklist to ensure that each  subject has been addressed.  Style and Composition  A table of contents should be included in each submittal.  The licensee should clearly and concisely present all information.  Confusing or ambiguous statements and general statements of intent  should be avoided. Definitions and abbreviations should be consistent  throughout the submittal and in keeping with generally accepted usage.  Wherever possible, duplication of information should be avoided.  Thus, information already included in other NRC-required physical  protection plans, e.g., the licensees Site Physical Protection Plan and  Safeguards Contingency Plan, may be covered by specific reference to the  appropriate sections of those documents.  Drawings, diagrams, maps, and tables should be used when  information may be presented more adequately or conveniently by such  m