RG 5.59-83 相关标准章节.docx

Publication Date: 2/1/83  Pages: 62  Date Entered: 2/23/84  Title: STANDARD FORMAT AND CONTENT FOR A LICENSEE PHYSICAL SECURITY PLAN FOR THE PROTECTION OF SPECIAL NUCLEAR MATERIAL OF MODERATE OR LOW STRATEGIC SIGNIFICANCE (11/80)  Revision 1  February 1983  U.S. NUCLEAR REGULATORY COMMISSION  REGULATORY GUIDE  OFFICE OF NUCLEAR REGULATORY RESEARCH  REGULATORY GUIDE 5.59  (Task SG 229-4) STANDARD FORMAT AND CONTENT  FOR A LICENSEE PHYSICAL SECURITY PLAN  FOR THE PROTECTION OF SPECIAL NUCLEAR MATERIAL  OF MODERATE OR LOW STRATEGIC SIGNIFICANCE  INTRODUCTION  The Atomic Energy Act of 1954, as amended, directed the U.S.  Atomic Energy Commission (AEC) to regulate the receipt, manufacture,  production, transfer, possession, use, import, and export of special  nuclear material (SNM) in order to protect the public health and safety  and to provide for the common defense and security. The Energy  Reorganization Act of 1974 transferred all the licensing and related  regulatory functions of the AEC to the Nuclear Regulatory Commission  (NRC).  The principal requirements with respect to the physical protection  of licensed activities against industrial sabotage and with respect to  the physical protection of special nuclear material in transit are found  in 10 CFR Part 50, Domestic Licensing of Production and Utilization  Facilities; Part 70, Domestic Licensing of Special Nuclear Material;  Part 73, Physical Protection of Plants and Materials; and Part 110,  Export and Import of Nuclear Equipment and Materials.  Paragraph 50.34(c) of 10 CFR Part 50 and paragraphs 70.22(g),  70.22(h), and 70.22(k) of 10 CFR Part 70 identify the physical  protection information that must be provided in a physical security plan  as part of a license application. This plan is required in order for the  applicant to demonstrate compliance with the specific physical