c1410-98中文版-多孔三聚氰胺绝热和吸音的标准规范.docVIP

C 1410 PAGE 803 Designation: C 1410-98编号：C 1410-98 Copyright ?ASTM, 100 Barr Harbor Drive. West Conshohocken PAGE 802 Standard Specification forCellular Melamine Thermal and Sound-Absorbing Insulation1多孔三聚氰胺绝热和吸音的标准规范1 1 This specification is under the jurisdiction of ASTM Committee C-16 on Thermal Insulation and is the direct responsibility of Subcommittee C16.22 on Organic and Nonhomogeneous Inorganic Thermal Insulation.本规范受ASTM委员会C-16隔热分委会的管辖，并且由C16.22衬垫和松散填充绝缘材料分会直接负责。现行版本于1998 Current edition approved December 10, 1998. Published February 1999.年12月10日批准，并且于1999年2月出版。 2 Annual Book of ASTM Standards. Vol 04.06.ASTM标准年鉴，第04.06卷。 3 Annual Book of ASTM Standards. Vol 08.02.ASTM标准年鉴，第14.03卷。 4 Annual Book of ASTM Standards, Vol 04.07.ASTM标准年鉴，第14.03卷。 This standard is issued under the fixed designation C 1410; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (€) indicates an editorial change since the last revision or reapproval.本标准以固定编号C 1410刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示必威体育精装版重新批准的年份。上标（ε）表示自上一修订版或重新批准后的编辑性修改。 1. Scope适用范围 1.1 This specification covers the type, physical properties,and dimensions of open-cell melamine foam intended for use as thermal and sound-absorbing insulation for temperatures from -40 to +350°F (-40 to +177°C) in industrial environ-ments.本规范涵盖作为（拟用为）绝热和吸音材料的三聚氰胺(开孔)泡沫材料的类型、物理性质和尺寸，该材料在工业环境中的适用温度为 1.2 The use of thermal insulation materials covered by this specification may be governed by building codes that address fire performance.本规范涵盖绝热材料的使用应遵循的耐火性能建筑规范。 1.3 The use of an appropriate vapor retarder is required on cold surface applications where water vapor could condense and cause a decrease in thermal performance. Refer to Practice C 755 for selection of vapor retarders. Facings shall be agreed upon between the purchaser and the ma