DIN13-24-2005 国外国际标准.pdf

DEUTSCHE NORM August 2005 DIN 13-24 { ICS 21.040.10 Supersedes DIN 13-24:1983-10 General purpose ISO metric screw threads – Part 24: Limits of sizes for fine pitch threads with preferred tolerance classes – Nominal thread diameters of 112 mm to 180 mm Metrisches ISO-Gewinde allgemeiner Anwendung – Teil 24: Grenzmaße für Feingewinde mit bevorzugten Toleranzklassen – Gewinde-Nenndurchmesser von 112 mm bis 180 mm Document comprises 19 pages Translation by DIN-Sprachendienst. In case of doubt, the German-language original should be consulted as the authoritative text. © No part of this translation may be reproduced without prior permission of English price group 12 DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, www.din.de !,ni, has the exclusive right of sale for German Standards (DIN-Normen). www.beuth.de 11.06 9757009 DIN 13-24:2005-08 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Terms and definitions 4 4 Limits of size 4 Figures Figure 1 — Internal thread with tolerance position H 4 Figure 2 — External thread with tolerance position h 5 Figure 3 — External thread with tolerance position g 5 Tables Table 1 — Limits of size 6 Foreword This standard has been prepared by Section B Gewinde of the Norme