aatcc130-2010 国外国际标准.pdf

AATCC Test Method 130-2010 Soil Release: Oily Stain Release Method Developed in 1969 by AATCC Commit- dures and are not intended to be all inclu- cm (15.0 × 15.0 ± 0.4 in.) for each deter- tee RA56; reaffirmed 1970, 1974, 1977; sive. It is the user’s responsibility to use mination. Condition the test specimens editorially revised 1978, 1983, 1986, safe and proper techniques in handling for a minimum of 4 h at 21 ± 1°C (70 ± 1997, 2004, 2005, 2008; revised 1981, materials in this test method. Manufac- 2°F) and 65 ± 2% RH prior to application 1990, 1995, 2010; editorially revised turers MUST be consulted for specific of stains. and reaffirmed 2000. details such as material safety data sheets and other manufacturer’s recommenda- 7. Staining Procedure tions. All OSHA standards and rules 1. Purpose and Scope must also be consulted and followed. 7.1 Place the unstained specimen flat 4.1 Good laboratory practices should on a single thickness of AATCC White 1.1 This test method is designed to be followed. Wear safety glasses in all Textile Blotting Paper on a smooth, hori- measure the ability of fabrics to release laboratory areas. zontal surface (see 12.3). oily stains during home laundering. 4.2 The 1993 AATCC Standard Refer- 7.2 Using the medicine dropper, place 1.2 Th