ECA EIA-364-28F-2011 国外国际标准.pdf

ANSI/EIA-364-28F-2011 Approved: January 14, 2011 EIA STANDARD F 8 TP-28F 2 - 4 6 3 VIBRATION TEST PROCEDURE FOR - A ELECTRICAL CONNECTORS AND I E SOCKETS EIA-364-28F JANUARY 2011 EIA Standards Electronic Components Association NOTICE This standard is based upon the major technical content of International Electrotechnical Commission standard 60512-2-1 2005-Febuary (was IEC 512-2, test 2a), contact resistance - millivolt level method. It conforms in all essential respects this IEC standard. EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of ECA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than ECA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by ECA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, ECA does not assume any liability to any patent owner, nor does it assume any obligation whatever to p