数码摄像机-RedOne-REDONEQUICKSTARTGUIDE说明书.pdf

THANKS Congratulations and thank you for your purchase of a RED ONE™ camera. Before un- packing and assembling the camera body and any accessories, please review the QUICK START GUIDE. If there is any physical damage to your camera or accessories, please contact us immediately at info@. The following instructions will outline basic assembly of the RED ONE™ camera body, RED™ BASE PRODUCTION PACK, RED™ LCD, REDFLASH™, RED DRIVE®, RED BRICK®, and RED™ Lens. For additional information refer to the latest version of the RED ONETM CAMERA: OPERA- TIONS GUIDE located at /support. CAMERA / ACCESSORY COMPONENTS Included with the RED ONE™ Camera Body are: • 1 - Mini XLR Adaptor • 1 - BNC-to-DIN Cable • 1 - SD Card • 1 - Bolt Set (includes tools) • 1 - Min-XLR-to-Mini-XLR Cable Included with the RED™ BASE PRODUCTION PACK are: • 1 - Bottom Plate • 1 - Top Handle • 1 - Bolt Set (includes tools) • 1 - Top Mount • 1 - Cradle Assembly • 1 - Universal Mount • 1 - Right Handle • 2 - 18” Stainless Rods • 1 - Shoulder Dovetail Included with the RED™ LCD are: • 1 - LCD • 1 - 5” Arm • 1 - LCD Cable RED ONE™ Shown With Base Production Pack Installed Additional accessories are available for purchase to create the perfect camera to fit your exact needs. Log on to /store. CAMERA ASSEMBLY PROCEDURE The following instructions will outline basic assembly of the RED ONE™ camera body, BASE PRODUCTION PACK, RED™ LCD, REDFLASH™, RED DRIVE®, and RED BRICK®. When connecting cables between camera and components, align Red dots on cable and connector and press in firmly to establish a secure connection. Wingnuts can be indexed by pulling out and rotating to desired position. This may be necessary during assembly to clear components. 1. Remove your RED