wiss转台ef控制器使用使用指南.doc

Technology that inspires Operating Instructions EF 037/1-1.0 EF 150/3-1.0 EF 220/3-1.0 EF 300/3-1.0 980-281031001 / EN 03/2010 This documentation is copyright-protected. Duplication (even of extracts) is not permitted without the prior written consent of WEISS GmbH. WEISS GmbH reserves the right to make alterations to this documentation (also without prior notice). WEISS GmbH is not liable for any technical or printing errors in this document. We accept no liability for damages directly or indirectly related to the provision or use of this documentation. This does not include damages arising from death, personal injury or damage to health or to such damages resulting from a grossly negligent or deliberate infringement of obligations. Release: March 2010 Copyright: WEISS GmbH Sondermaschinentechnik Siemensstra?e 17 D-74722 Buchen/Odw. Tel.: +49 (0)6281/5208-0 Internet: www.weiss-gmbh.de 2 Table of Contents 1 Safety instructions 4 1.1 Safety and application instructions 4 2 Description of the rotary indexing table control system EF 7 3 Technical data 8 3.1 General Speci?cations 8 3.2 Electrical connection 9 3.3 Motor lines 9 3.4 Mains connection 10 3.5 Terminal Assignment 11 3.6 Overview of connection terminals 12 4 Description of the inputs and outputs 13 4.1 Terminal description - inputs 13 4.2 Terminal description - outputs 15 4.3 Timing diagram 16 5 Operation 17 5.1 Operation from the keypad 17 5.2 Codes 18 6 Starting up 20 6.1 Connection 20 6.2 EMERGENCY STOP 25 6.3 Electrical start-up 26 7 Trouble shooting and fault ?nding 28 7.1 Trouble Shooting 28 7.2 Error messages 28 7.3 Reset of error messages 28 7.4 Error messages of the frequency converter 28 8 Connection wiring diagrams 32 3 1. Safety instructions 1.1 Safety and application instructions Validity: These instructions apply to EF control systems in the model series: EF037/1-1.0 EF150/3-1.0 EF220/3-1.0 EF300/3-1.0 Symbols: Warnings are emphasised by a safety symbol and are shown as follows depending on t