现代起亚标准MS201-01汽车材料标识.docVIP

? ? ? ? ENGINEERING STANDARD ???? (SPEC NO.) MS 201-01 ??? (SHT/SHTS) PAGE 15/ NUMPAGES 15 1F-SG-00002 HYUNDAI·KIA MOTORS 1F-SG-00002 HYUNDAI·KIA MOTORS SCOPE OF APPLICATION ?? ?? ENGINEERING STANDARD SHT/SHTS ALL PAGE 1/14 ESTABLISHED BY MATERIAL SPECIFICATION SPEC NO. POLYMERIC MATERIALS RESEARCH TEAM MS 201-01 TITLE: Marking of materials for automotive parts CONTENTS TOC \o 1-3 \n \p \h \z 1. SCOPE 2. PURPOSE 3. APPLICATION 4. MARKING METHOD 4.1 Marking Construction 4.2 Location and Methods of Marking 4.3 Size of Marking 4.4 Examples of Marking 5. EXPLANATION AND SYMBOL OF MATERIALS 5.1 Examples of Thermoplastic and Thermosetting Plastics 5.2 Symbols indicating special characteristics 5.3 Examples of Blends and Copolymers 5.4 Examples of Elastomers 5.5 Examples of Symbol for Fillers and Reinforcing Materials 5.6 Code numbers for flame retardants 5.7 Examples of Materials for Reservoir Parts 6. OTHERS EMS10134 REVISION OF ENGLISH SPECIFICATION ALL JUNE.09.2001 C.M.JIN EMST0026 ISSUE OF ENGLISH SPECIFICATION ALL MAR.29.1996 T.W.YOO SYM EO NO. DESCRIPTION OF CHANGE REV.PAGE REV.DATE REV.BY ESTABLISHMENT 1996. 3. 29 REFERENCE ISO 1043 SAE J 1344 VDA 260 SPI CODING SYSTEM KES PREPARED CHECKED APPROVED BY BY BY ORIGINAL FILED AT IPIS (ES/MS MANEGEMENT SYSTEM) C.M.JIN SIGNED 01/05/03 J.H.HONG SIGNED 01/05/03 Y.S.LIM SIGNED 01/05/03 SCOPE Marking of parts made of all materials for automotive is defined by this specification. Parts above 50g, in principle, must be marked and those below 50g be marked if possible. PURPOSE The purpose of this specification is to enlarge identity of materials for recycling and disposal of vehicle and to promote effectiveness of material separation process. APPLICATION This specification is used as marking method of parts of materia