- 1、本文档共2页,可阅读全部内容。
- 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
1. SCOPE
适用范围:
This specification applies for aluminum-alloy die casting porosity definition. It based on
original spec of ASTM E505, but not for substitute of original spec, it only provide more
comprehensive interpretion, so as to use with original spec. The requirement would
override the original spec when conflict.
本规范涵盖了所有铝合金压铸砂孔的要求。本规范参照美国材料实验协会标准 ASTM E505
的原始规范,但不取代原规范,仅提供更全面的说明,所以原规范必须使用。当本规范和原
规范的内容矛盾时,本规范要求取代原规范内容。
2. SPECIFICA TION
规范:
Reference radiographs for aluminum-alloy die casting
Casting Applicable Casting Inside Porosity acceptable standard Surface Porosity acceptable standard
Thickness Thickness 可适用的壁 内部砂孔可接受的标准 表面砂孔可接受的标准
壁厚 厚 Radiographs : Scale 1:1 Radiographs : Scale 1:1
(mm) (mm) X 射线照片:比例 1 :1 X 射线照片:比例 1 :1
3.2 Up to 3.2mm
15.9 Over 3.2mm to 25.4mm
3. POROSITY LEVEL
Level 1 Level 2 Level 3 Level 4
1 级 2 级 3 级 4 级
Radiographs : Scale 1:1 Radiographs : Scale 1:1 Radiographs : Scale 1:1 Radiographs : Scale 1:1
X 射线照片:比例 1: 1 X 射线照片:比例 1 :1 X 射线照片:比例 1 :1 X 射线照片:比例 1 :1
2
0.50~0.70mm 3 个/10cm 0.50~1.0mm 5 个/10cm 2 0.50~1.5mm 10 个/10cm 2 0.50~4.0mm 15 个/10cm 2
0.7~1. 0mm 1 个/10cm 2 1.0~1.5mm 1 个/10cm 2 1.5~4.0mm 1 个/10cm 2 4.0~10mm 1 个/10cm 2
4. REMARK
备注:
Unless special explanation, void with size of ≦0.5mm will not be
considered as porosity, and this apply to inside and on the surface
porosity of aluminum-alloy die casting!
如果没有特别说明, 0.50mm 及以下的气孔不作为
文档评论(0)