aci209.2r2008精品管理文档.pdf

ACI 209.2R-08 Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete Reported by ACI Committee 209 First Printing May 2008 American Concrete Institute® Advancing concrete knowledge Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete Copyright by the American Concrete Institute, Farmington Hills, MI. All rights reserved. This material may not be reproduced or copied, in whole or part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of ACI. The technical committees responsible for ACI committee reports and standards strive to avoid ambiguities, omissions, and errors in these documents. In spite of these efforts, the users of ACI documents occasionally find information or requirements that may be subject to more than one interpretation or may be incomplete or incorrect. Users who have suggestions for the improvement of ACI documents are requested to contact ACI. Proper use of this document includes periodically checking for errata at /committees/errata.asp for the most up-to-date revisions. ACI committee documents are intended for the use of individuals who are competent to evaluate the significance and limitations of its content and recommendations and who will accept responsibility for the application of the material it contains. Individuals