CASE凯斯CX55小挖操作手册：0005.pdfVIP

4. MAINTENANCE 4-1 4. MAINTENANCE 4-2 4. MAINTENANCE 4.1 GENERAL INFORMATION READ, UNDERSTAND AND FOLLOW ALL SAFETY PRECAUTIONS CONTAINED IN THIS MANUAL BEFORE PERFORMING ANY INSPECTION OR MAINTENANCE PROCEDURES ON THIS MACHINE, ITS SYSTEMS OR COMPONENTS. Make sure to consult with our distributor for the adjustment, disassembling and repair of the engine, reduction gear and electronic equipment (controller, etc.). a. It is recommended by us, that an inspection and maintenance schedule be developed and main- tained on a regular basis for this machine. Develop- ing and maintaining such a schedule, helps to keep the machine in optimum operating condition. b. The information contained in this section gives the proper procedures for performing inspection and maintenance functions for this machine. Use these procedures when performing inspection and main- tenance as they will guide the technician step by step for each procedure. Also, refer to the Inspec- tion and maintenance charts for general service in- terval recommendations. c. Basically, lubrication and maintenance intervals are determined by the hour meter. If performing lubrica- tion and maintenance according to calendar time is preferred, the hour meter reading corresponds to the lubrication and maintenance period (daily, weekly, monthly, etc.) in calendar time; thus calen- dar time can be used. Items for which service time cannot be specified are explained in the section WHEN REQUIRED. The inspection and maintenance charts provided in this section give only general time intervals. It may be nec- essary to develop a custom schedule to perform ma- chine maintenance at more frequent