05地下矿山地下回采计划ms_underground_production_scheduling_v602.docx

MineSched V6 Underground ProductionSchling MineSched V6 Underground Production Sch ling December 2008 Copyright ? 2008 GemcomInternational..GemcomInternational publishes this documentation for Copyright ? 2008 Gemcom International. . Gemcom International publishes this documentation for the sole use of MineSched licenses. Without written permission you may not sell, reproduce, store in a retrieval system, or transmit any part of the documentation. For such permission, or to obtain extra copies please contact your local Gemcom Office. Gemcom International Level 8 190 St Georges Terrace Perth, Western Australia 6000 Telephone: (08)Fax: (08)While every precaution has been taken in the preparation of this manual, we assume no responsibility for errors or omissions. Neither is any liability assumed for damage resulting from the use of the information contained herein. All brand and product names are trademarks or registered trademarks of their respective companies. Contributors Aaron Loffler Gemcom International Perth, Western Australia Products MineSched 6.0 Surpac 6.1 Document Release Date December 2008 Table of ContentsOverview 5Data Storage and Familiarisation 6Task: Setup Data Management Hierarchy 6The Surpac Production Interface 6Task: Set Table of Contents Overview 5 Data Storage and Familiarisation 6 Task: Setup Data Management Hierarchy 6 The Surpac Production Interface 6 Task: Set Your Working Directory 7 The MineSched Production Interface 7 Data Review 9 Data Editing and Management 13 Creating Stopes 13 Block Model Reporting 13 Task: Report Figures from Model 13 Notes on Partial Percentages 15 Task: Report Stope Tonnes and Grades Using Partial Percentages 18 Polygons for Graphical Results 18 Task: Produce Polygons for Graphical Results 18 Block Model Material Classes 22 Task: ine Material Classes for the Sch le 22 MineSched Scenario Management 25 Creating a Scenario 25 Task: Create a Scenario 25 Navigating the Scenario 27 Step Navigator 27