《WISE900门机一体化控制器用户手册》-英文.pdf

User Guide WISE900 Series Integrated Door Operator Controller User Guide A01 Data code Preface Preface Thank you for purchasing the WISE900 series integrated door operator controller. The WISE900 series integrated door operator controller is a variable frequency controller specialized for driving the elevator door system. It integrates the door open/close logic control and motor drive control, and implements control on the entire door system with door open/close commands given by the external system through CAN communication. The WISE900 can drive the AC asynchronous motor and permanent magnet synchronous motor (PMSM), and supports distance control mode. It is applicable to various applications and can meet drive and control requirements of most door systems. This manual describes the functions and correct use of the WISE900 controller. Read this manual carefully before use (installation, operation, maintenance, inspection, etc.). Use this product only after understanding safety precautions. Notes ◆ For illustration purpose, the drawings in the manual are sometimes shown without covers or protective guards. Remember to install the covers or protective guards as specified before using the product, and operate in accordance with the instructions. ◆ The drawings in the manual are for illustration only. Actual products may vary. ◆ The instructions are subject to change, without notice, due to product upgrade, specification modification as well as efforts to increase the accuracy and conve