Mettler-Toledo梅特勒-托利多操作说明书 隔膜式臭氧传感器pureO3更换.pdf

pureO3 Ozone Sensor 12 mm Ch nging the interior body W rning! Contact of electrolyte with mucous membrane or eyes is to be avoided. Therefore protective gloves nd goggles h ve to be worn for the following dism ntling procedure. Bec use the electrolyte cont ins high concentr tion of bor te, the pureO3 Ozone Sensor 12 mm ch nge of interior body should not be performed by pregn nt women. f such contact occurs, the affected area should be well Ch nging the interior body rinsed with water. n the case of accident, or should ever any ad- Ersetzen des Innenkörpers verse signs appear, get immediate medical attention. Gre t c re should be exercised when h ndling the gl ss inner Rempl cement du corps interne bodies, since ny h irline cr cks will dversely ffect sensor perform nce. The gold c thode is scr tch sensitive nd must not be cle ned with rough or h rd objects (e.g.: s ndp per, met llic needles, ...). After n interior body ch nge, lw ys repl ce the membr ne body with new p rt. When changing the interior body, please observe the following instructions (see illustration): Attention! Make sure that these steps are carried out in a cle n Steckverbindung AK9 re . AK9 connector Connecteur AK9 1. Unscrew the cap sleeve from the sensor shaft and carefully pull it off the sensor. Gewindehülse Pg 13,5 2. Pull off the membrane body from the interior body .