Mettler-Toledo梅特勒-托利多技术样本资料隔膜式臭氧传感器pureO3.pdf

Instru tions for hanging the ele trolyte and membrane body of the pureO3 ozone sensors 12 mm Warning! Contact of electrolyte with mucous membrane or eyes is to be avoided. Therefore prote tive gloves and goggles have to be worn for the following dismantling pro edure. Be ause pureO3 Ozone Sensor 12 mm the ele trolyte ontains a high on entration of borate, the hange of interior body should not be performed by pregnant Membrane Kit women. f such contact occurs, the affected area should be well rinsed with water. n the case of accident, or should ever any ad- Membran-Kit verse signs appear, get immediate medical attention. Trousse de re hange Great are should be exer ised when handling the glass inner bodies, sin e any hairline ra ks will adversely affe t sensor performan e. The gold athode is s rat h sensitive and must not be leaned with rough or hard obje ts (e.g.: sandpaper, metalli needles, ...). When the membrane begins to exhibit signs of failure (mechani- cal damage etc.), it has to be replaced. When hanging the interior body, please observe the following instru tions (see illustration): Steckverbindung AK9 AK9 connector 1. Unscrew the cap sleeve from the sensor shaft and carefully pull Connecteur AK9 it off the sensor. 2. Pull off the membrane body from the interior body . Gewindehülse Pg 13,5 Pg 13.5 threaded sleeve f it is tight-fitted