2020年灯座注塑模具设计说明书参照模板.pdf

洛阳理工学院毕业设计（论文） 灯座注塑模具设计 摘 要 塑料注塑模是一种用来生产塑料零件的模具。它被安装在塑料注塑机上，由 塑料注塑机将塑料颗粒融化成热熔体，经过合模、高压注塑、高压冷却定型、开 模、推出制件等工序，获得所需的塑料制品。 近 10 年来，由于塑料具有的良好特性， 使得塑料制品获得愈来愈广泛的应用， 塑料模已成为广泛使用的一类模具。据统计， 80 ％以上的工程塑料制品都要采用 注射成型方式生产。 本设计是对灯座进行的注塑模设计， 利用 Pro/E 软件对塑件进行了实体造型， 对塑件结构进行了工艺分析。明确了设计思路，确定了注射成型工艺过程并对各 个具体部分进行了详细的计算和校核。如此设计出的结构可确保模具工作运用可 靠，保证了与其他部件的配合。 最后用 autoCAD绘制了一套模具装配图和零件图。 本课题通过对灯座的注塑模具设计，巩固和深化了所学知识，取得了比较满 意的效果，达到了预期的设计意图。 关键词： 塑料模具，注射成型，模具设计 I 洛阳理工学院毕业设计（论文） The Lamp Holder Plastic Injection Mold Design ABSTRACT Plastic injection mold is used to produce plastic parts of a mold. It was installed in the plastic injection molding machine, plastic injection molding machine by the plastic particles melt into a hot body, after mold, high pressure injection molding, high-pressure cooling shape, the mold, parts such as the introduction of processesto obtain the necessary plastics. The past 10 years, as a result of the good characteristics of plastic with which to obtain more and more plastic products widely used, plastic has become a widely used tool for a class. According to statistics, engineering plastics more than 80% of all products produced using injection molding. The design of the lamp holder for the injection mold base design, The use of Pro / E software for the plastic parts for the solid modeling, the structure of the plastic parts of the process analysis. A clear idea of the design to determine the injection molding process and the specific part of a detailed calculation and checking. The structure of such a design work to ensure that the use of a reliable tool to ensure the co-ord